Engine loom is now complete and I will be fitting over the Christmas break. Fully sheathed in Raychem DR25, labelled and with Milspec weatherproof connectors throughout.
Merry Christmas everyone!
Thursday, 24 December 2015
Friday, 11 December 2015
Engine,dash & comms loom (Part I)
Sorry for the lack of updates. It's been a month since my last post, but to be honest it feels like not a lot has happened on the car in that time. :-(
I have been waiting on the CNC machining of the front brake calipers (will post on these shortly as I have one of them now) before I can bleed the brakes and clutch.
And I have been waiting on completion of the engine, dash and ECU comms loom.
Obviously both of these are needed before I can try to start the engine and take the car for mapping. I have seen the loom and it's at least 75% complete, hopefully I will have it in the next week or so. In the meantime here's a few pictures of work in progress and bench testing the Cosworth Omega D1 dash:
I have been waiting on the CNC machining of the front brake calipers (will post on these shortly as I have one of them now) before I can bleed the brakes and clutch.
And I have been waiting on completion of the engine, dash and ECU comms loom.
Obviously both of these are needed before I can try to start the engine and take the car for mapping. I have seen the loom and it's at least 75% complete, hopefully I will have it in the next week or so. In the meantime here's a few pictures of work in progress and bench testing the Cosworth Omega D1 dash:
Green = injectors. Blue = coils. White = sensor inputs. Pink 0V. Orange 5V. Red 12V... etc etc :-)
Omega D1 with shift light module
Subscribe to:
Posts (Atom)